Boomer Chains
High Test
|
Load Binders
 Ratchet Binder
|
 Standard Binder
|
 WARNING |
- Failure to use this load binder properly may result in your serious injury or even death.
- Do not operate load binder while standing on the load.
- Move handle with caution. It may whip - keep body clear.
- Keep yourself out of the path of the moving handle.
- You must be familiar with state and federal regulations regarding size and number of chain systems required for securing loads on trucks.
- Always consider the safety of nearby workers as well as yourself when using load binder.
- Do not throw these instructions away. Keep them close at hand and share them with any others who use this load binder.
- While under tension, load binder must not bear against an object.
- Never use a cheater pipe or handle extender to release handle. Use a steel bar and pry under the handle and stay out of the path of handle as it moves upward.
|
 |
FELCO C7 |
CUTS UP TO 3/16" WIRE ROPE |
 |
FELCO C9 |
CUTS UP TO 1/4" WIRE ROPE |
 |
FELCO C12 |
CUTS UP TO 3/8" WIRE ROPE |
 |
FELCO C16 |
CUTS UP TO 5/8" WIRE ROPE |
Nicopress® Sleeves and Tools
IMPACT TYPES (HAMMER ACTION)
 |
For Cutting Wire Rope:
Up to 5/8" - Model 1 designed for occasional on-the-job-cutting.
|
|
| Model |
Capacity |
Height |
Base |
Weight |
| 1 |
5/8" |
6" |
3 1/2" |
7 lbs. |
| 1 A |
1-1/16" |
7" |
6-1/4" |
15 lbs. |
| 2 |
1 1/2" |
9" |
7 3/4" |
28 lbs. |
HYDRAULIC TYPE (MANUALLY OPERATED)
| Model |
Capacity |
Dimensions |
Weight |
| W |
3/4" |
12" x 3-5/8" x 6" high |
21 lbs. |
| P |
1-1/8" |
14" x 4-1/8" x 7" |
33 lbs. |
| C |
1-3/4" |
18-1/2" x 5" x 8" |
65 lbs. |
| WARNING |
| Wear safety goggles, use cable bands and read insturction sheet before using this tool.
|
Hoists
Electric Chain Hoists
I Beam Trolleys
Push Type |
Hand Geared |
| Hand Chain Hoists
 |
Lever Crank Type Hoists
 |
Lever Type Wire Rope Hoists
 |
| Wire Rope Hoists
 |
MANY SIZES, STYLES AND CAPACITIES AVAILABLE.
If you do not see what you are looking for please call.
| WARNING
|
 |
Inspect Hoist or sling and consult industry recommendations and OSHA standards before each use. This Hoist may fail if it is damaged, abused, misused, overused or improperly maintained.
DEATH or INJURY can occur from improper use, maintenance, or overload.
|
WIRE ROPE ACCESSORIES
DISTRIBUTOR FOR ALL CROSBY GROUP PRODUCTS
Metro Wire Rope Corporation
553 Lehigh Avenue
Union, New Jersey 07083
1-908-964-3690
FAX 1-908-810-1904
FAX 1-908-964-8990
metrowiresales@aol.com
www.metrowirerope.com
|
